Grain Boundary Diffusion Improves Heavy Rare Earth Efficiency-But Physics Still Draws the Line

Aug 4, 2026

4 minute read.

Highlights

  • Grain boundary diffusion allows dysprosium and terbium to concentrate at crystal grain boundaries, boosting coercivity while significantly reducing heavy rare earth consumption.
  • The process is highly effective for thin EV magnets but faces physical limitations with thicker magnets used in wind turbines and defense applications.
  • Diffusion depth is constrained by temperature, time, and grain growth—longer heat treatments can reduce effectiveness by driving elements into grain interiors.
  • The technology reduces heavy rare earth intensity but does not eliminate the need for dysprosium, terbium, or specialized magnet manufacturing expertise.
  • Investors should recognize that smarter use of heavy rare earths still requires a stable and sufficient supply chain for dysprosium and terbium.

Grain boundary diffusion (GBD) is one of the most important advances in permanent magnet manufacturing because it dramatically reduces the amount of expensive heavy rare earth elements—primarily dysprosium (Dy) and terbium (Tb)—needed to produce high-performance neodymium-iron-boron (NdFeB) magnets. The process is already widely used for many electric vehicle magnets, but it is not a universal solution. Rare Earth Exchanges® examines where the science is well established, where expectations become overstated, and why the world will continue to need heavy rare earth supply even as magnet manufacturers become more efficient.

REEx Insight: Better Engineering, Not a Miracle

Physicist Katie Gallagher Boggs (opens in a new tab) recently published an excellent technical explanation (opens in a new tab) reminding readers that grain boundary diffusion is not "magic" but rather sophisticated microstructural engineering. Her central argument—that the technology reduces heavy rare earth consumption without eliminating the underlying need—is well supported by magnetics research and deserves attention from investors.

Rare Earth Exchanges agrees with her broader conclusion. In today's market, the objective is not to eliminate dysprosium and terbium, but to use them more intelligently. That distinction has profound implications for both rare earth pricing and long-term supply-chain strategy.

The Science Behind the Magnet

Rather than alloying dysprosium or terbium throughout an entire magnet, manufacturers coat the finished NdFeB magnet and use heat treatment to allow the heavy rare earth elements to diffuse along crystal grain boundaries—precisely where resistance to demagnetization, known as coercivity, is most needed.

The result is significantly improved magnetic performance using considerably less heavy rare earth material.

Her discussion of diffusion depth is also important. Diffusion is inherently limited by distance, temperature, time, and grain growth. Longer heat treatments eventually cause crystal grains to enlarge and allow dysprosium or terbium to migrate into grain interiors rather than remaining concentrated at grain boundaries, diminishing the process's effectiveness. Consequently, grain boundary diffusion is especially effective for relatively thin magnets used in electric vehicles but becomes increasingly challenging for thicker magnets used in large wind turbines and certain defense systems, according to our research.

Where Optimism Meets Reality

The physicist warns against treating grain boundary diffusion as a universal answer to heavy rare earth shortages, particularly amid recent attention surrounding the MP Materials–USA Rare Earth trade-secret litigation.

One technical caveat deserves mention. The specific diffusion depths, treatment times, and maximum magnet thicknesses cited should be viewed as representative engineering ranges rather than absolute physical limits. These parameters vary depending on magnet chemistry, processing conditions, grain size, and proprietary manufacturing methods.

And what are the implications for investors? Grain boundary diffusion reduces heavy rare earth intensity. It does not eliminate the need for dysprosium, terbium, or advanced magnet manufacturing expertise.

REEx Connect

Author: Katie Gallagher Boggs

Key Topics: Grain Boundary Diffusion (GBD), NdFeB magnets, dysprosium (Dy), terbium (Tb), coercivity, permanent magnet manufacturing

Companies Referenced: MP Materials; USA Rare Earth

LinkedIn: Katie Gallagher Boggs (opens in a new tab) Note Gallagher Boggs leads a consultancy called Southern Forge.

Spread the word:

Search

Mentioned in this article

Recent REEx News

China's Nine Government Agencies Launch 2030 Recycling Overhaul as Global Mineral Competition Intensifies

China and South Korea Advance Free Trade Talks as Xi and Lee Deepen Supply-Chain Cooperation

Mexico's Claudia Sheinbaum Meets Xi Jinping in Shenzhen as China Seeks Deeper Industrial Ties

Egyptian Scientists Boost Supercapacitor Energy Storage 84% Using Rare-Earth Holmium

China and Chile Expand Mining Cooperation as Xi-Kast Summit Highlights Great Powers Era 2.0

By Daniel

Inspired to launch Rare Earth Exchanges in part due to his lifelong passion for geology and mineralogy, and patriotism, to ensure America and free market economies develop their own rare earth and critical mineral supply chains.

0 Comments

No replies yet

Loading new replies...

D
DOC

Moderator

6,645 messages 108 likes

Grain boundary diffusion cuts heavy rare earth use in NdFeB magnets but cannot eliminate dysprosium and terbium demand—here's what investors need to know. (read full article...)

Reply Like

Straight Into Your Inbox

Straight Into Your Inbox

Receive a Daily News Update Intended to Help You Keep Pace With the Rapidly Evolving REE Market.

Fantastic! Thanks for subscribing, you won't regret it.

Straight Into Your Inbox

Straight Into Your Inbox

Receive a Daily News Update Intended to Help You Keep Pace With the Rapidly Evolving REE Market.

Fantastic! Thanks for subscribing, you won't regret it.